move mbr/vbr code to FAT32 system

include/fat32/FAT32_SYS.nasm

@@ -19,6 +19,107 @@
 %include "fat32/bpb_offset_bx.inc"
 %include "fat32/fat32_structures.inc"
 
+; int read_mbr(int boot_drive, void* dst)
+; destination buffer needs 512 bytes of space
+FAT32_load_mbr:
+    __CDECL16_PROC_ENTRY
+.proc:
+    ; read mbr on boot drive to memory (for the partition table)
+    movzx ax, byte [bp + 4]
+    push ax                                 ; drive_num (2)
+    push 0x01                               ; count (2)
+
+    push dword 0x0                          ; lba (4)
+
+    push word [bp + 6]                      ; offset = dst
+    push __STAGE2_SEGMENT                   ; this segment 
+    call BIOS_int13h_ext_read
+    add sp, 0xC
+.check_sig:
+    mov bx, [bp + 6]
+    cmp word [bx + 0x1FE], 0xAA55           ; check for bytes at end
+    jne ReadMbrData.error_nosign
+    ; TODO: this needs more error checking, zero checking, check the sig a bunch of stuff...
+.endp:
+    __CDECL16_PROC_EXIT
+    ret
+.error_nosign:
+    ERROR STAGE2_ERROR_BAD_MBR
+
+; int read_vbr(int boot_drive, void* buf)
+; read vbr on boot partition to memory (for fat bpb/ebpb)
+; TODO: seperate validation and loading the sector, just check the 0xAA55 at the end here...
+FAT32_load_vbr:
+    __CDECL16_PROC_ENTRY
+.proc:
+    mov bx, SteviaInfo
+    mov ax, word [bx + SteviaInfoStruct_t.p16_MbrPtr]      
+    add ax, DISK_PARTITION_TABLE_OFFSET                           
+    mov bx, ax                              ; offset to part table
+    mov cx, 4                               ; only checking 4 entries
+
+.find_active_L0:
+    mov al, [bx + PartEntry_t.attributes]
+    cmp al, 0x80                            ; 0x80 == 1000_0000b
+    je ReadVbrData.check_fstype
+    add bx, PartEntry_t_size                ; next part entry's attributes
+    loop ReadVbrData.find_active_L0
+    jmp ReadVbrData.error_noactive
+.check_fstype:
+    ; check for part_type = 0x0C (DOS 7.1+/W95 FAT32 w/ LBA) or 0x1C (Hidden 0x0C)
+    __BOCHS_MAGIC_DEBUG
+    mov al, [bx + PartEntry_t.part_type]
+    cmp al, 0x0C
+    je ReadVbrData.active_ok
+    ; *or*
+    cmp al, 0x1C
+    je ReadVbrData.active_ok
+
+    jmp ReadVbrData.error_badparttype        ; error if part_type != 0x1C or 0x0C
+.active_ok:
+    movzx ax, byte [bp + 4]
+    push ax                                 ; drive_num (2)
+    push 0x01                               ; count (2)
+
+    mov eax, dword [bx + PartEntry_t.lba_start]
+    push dword eax                          ; lba (4)
+
+    push word [bp + 6]                      ; offset = dst
+    push __STAGE2_SEGMENT                   ; this segment 
+    call BIOS_int13h_ext_read
+    add sp, 0xC
+    ; vbr (with fat bpb/ebpb) is at the buffer now
+.check_sig:
+    mov bx, [bp + 6]
+    cmp word [bx + 0x1FE], 0xAA55           ; check for bytes at end
+    jne ReadVbrData.error_nosign
+.check_FAT_sanity:
+    ; we only quickly validate that this is *probably* a FAT32 volume
+
+    add bx, 11                                             ; point bx at start of bpb (skip jmp code and ident)
+    cmp word [bx + FAT32_bpb_t.u16_TotalSectors16], 0      ; TotalSectors16 should be 0 (use TotalSectors32 in bpb)
+    jne ReadVbrData.error_totsectors
+
+    cmp word [bx + FAT32_bpb_t.u16_FATSize16], 0           ; FatSize16 will be 0 if FAT32 (use FATSize32 in ebpb)
+    jne ReadVbrData.error_fatsz
+
+    cmp word [bx + FAT32_bpb_t.u16_RootEntryCount16], 0    ; root dir info is in data clusters on fat32
+    jne ReadVbrData.error_rootdir
+.endp:
+    __CDECL16_PROC_EXIT
+    ret
+.error_noactive:
+    ERROR STAGE2_VBR_E_ACTIVE
+.error_nosign:
+    ERROR STAGE2_VBR_E_SIGN
+.error_totsectors:
+    ERROR STAGE2_VBR_E_TOT
+.error_fatsz:
+    ERROR STAGE2_VBR_E_FATSZ
+.error_rootdir:
+    ERROR STAGE2_VBR_E_DIRENT
+.error_badparttype:
+    ERROR STAGE2_VBR_E_PARTTYPE
 
 ; what a 'mount' should probably do at this point...
 ; - read VBR at partition_lba