update github workflow since github includes firefox & snaps in the default runner image, which causes the build to fail.

going to need a custom runner I guess...might as well only do actions on gitea.

.github/workflows/daily.yaml

@@ -3,7 +3,7 @@ on:
   push:
     branches: [ $default-branch ]
   schedule:
-    - cron: "0 7 * * *"   # daily 07:00
+    - cron: "0 7 * * 1"   # mondays at 07:00
   workflow_dispatch: {}
 
 jobs:

.gitignore

@@ -9,3 +9,5 @@ stevia-log
 .vscode/
 *.map
 compose-dev.yaml
+eth_null-tx.log
+eth_null-txdump.txt

bochsrc.txt

@@ -1,44 +1,44 @@
-# configuration file generated by Bochs
-plugin_ctrl: voodoo=false, unmapped=true, biosdev=true, speaker=true, extfpuirq=true, parallel=true, serial=true, busmouse=false, e1000=false, es1370=false, gameport=true, ne2k=false, sb16=false, usb_uhci=false, usb_ohci=false, usb_ehci=false, usb_xhci=false
+#
+# Bochs config
+#
 config_interface: textconfig
 display_library: x, options=gui_debug
-memory: guest=64, host=64, block_size=128
-romimage: file="/usr/share/bochs/BIOS-bochs-legacy", address=0x00000000, options=none, flash_data=none
-vgaromimage: file="/usr/share/bochs/VGABIOS-lgpl-latest"
-boot: disk
-floppy_bootsig_check: disabled=0
-floppya: type=1_44
-# no floppyb
-ata0: enabled=true, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
-ata0-master: type=disk, path="./build/disk.img", mode=flat, cylinders=0, heads=0, spt=0, sect_size=512, model="Stevia Disk", biosdetect=auto, translation=lba
-ata0-slave: type=none
-ata1: enabled=false
-ata1-master: type=none
-ata1-slave: type=none
-ata2: enabled=false
-ata3: enabled=false
-optromimage1: file=none
-optromimage2: file=none
-optromimage3: file=none
-optromimage4: file=none
-optramimage1: file=none
-optramimage2: file=none
-optramimage3: file=none
-optramimage4: file=none
-pci: enabled=1, chipset=i440fx, slot1=none, slot2=none, slot3=none, slot4=none, slot5=none
-vga: extension=vbe, update_freq=10, realtime=1, ddc=builtin
-cpu: count=1, ips=1000000, model=p3_katmai, reset_on_triple_fault=1, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
-print_timestamps: enabled=0
-port_e9_hack: enabled=false, all_rings=false
+plugin_ctrl: voodoo=false, unmapped=true, biosdev=true, speaker=true, extfpuirq=true, parallel=true, serial=true, busmouse=false, e1000=true, es1370=false, gameport=true, ne2k=false, sb16=false, usb_uhci=true, usb_ohci=false, usb_ehci=false, usb_xhci=false
+print_timestamps: enabled=1
 private_colormap: enabled=0
-clock: sync=none, time0=local, rtc_sync=0
-# no cmosimage
 log: -
 logprefix: %t%e%d
 debug: action=ignore
 info: action=report
 error: action=report
 panic: action=ask
+magic_break: enabled=1
+port_e9_hack: enabled=1, all_rings=false
+#
+# Machine Spec
+# 1x Pentium 3 @ (1M IPS) w/ 64MiB of System memory on the i440fx
+cpu: count=1, ips=1000000, model=p3_katmai, reset_on_triple_fault=0, cpuid_limit_winnt=0, ignore_bad_msrs=1, mwait_is_nop=0
+memory: guest=64, host=64, block_size=128
+romimage: file="/usr/share/bochs/BIOS-bochs-legacy", address=0x00000000, options=none, flash_data=none
+vgaromimage: file="/usr/share/vgabios/vgabios-stdvga.bin"
+pci: enabled=1, chipset=i440fx
+vga: extension=vbe, update_freq=10, realtime=1, ddc=builtin
+clock: sync=none, time0=local, rtc_sync=0
+#
+# Disks
+#
+boot: disk
+floppy_bootsig_check: disabled=0
+floppya: type=1_44
+floppyb: type=1_44
+ata0: enabled=true, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
+ata0-master: type=disk, path="./build/disk.img", mode=flat, cylinders=0, heads=0, spt=0, sect_size=512, model="Stevia Disk", biosdetect=auto, translation=lba
+ata0-slave: type=none
+#
+# Other hardware
+#
+usb_ehci: enabled=1, companion=ohci
+e1000: enabled=1, mac=52:54:00:12:34:56, ethmod=null
 keyboard: type=mf, serial_delay=150, paste_delay=100000, user_shortcut=none
 mouse: type=none, enabled=false, toggle=ctrl+mbutton
 sound: waveoutdrv=dummy, waveout=none, waveindrv=dummy, wavein=none, midioutdrv=dummy, midiout=none
@@ -48,6 +48,4 @@ parport2: enabled=false
 com1: enabled=true, mode=null
 com2: enabled=false
 com3: enabled=false
-com4: enabled=false
-magic_break: enabled=1
-port_e9_hack: enabled=1, all_rings=false
+com4: enabled=false

include/BIOS/func/E820_memory_map.nasm

@@ -35,7 +35,7 @@ endstruc
 
 ALIGN 4, db 0x90
 GetMemoryMap:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     push es         ; save segment register
 .func:
     mov dword [SteviaInfo + SteviaInfoStruct_t.MemoryMapEntries], 0
@@ -83,11 +83,11 @@ GetMemoryMap:
     ERROR STAGE2_MM_E820_NO_SMAP
 .endp:
     pop es
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 PrintMemoryMap:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     mov eax, dword [SteviaInfo + SteviaInfoStruct_t.MemoryMapEntries]
     cmp eax, 0
@@ -106,15 +106,15 @@ PrintMemoryMap:
     ; print_string strformat_buffer
     
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 FormatMemoryMapEntry:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ; create a string buffer somewhere and return address to result string in ax
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 

include/BIOS/func/a20enable.nasm

@@ -64,7 +64,7 @@
 ;    Bits 6-7 - 00: HDD activity LED off; any other value is "on"
 ALIGN 4, db 0x90
 EnableA20:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     push ds
     push es
 .a20_check:
@@ -134,7 +134,7 @@ EnableA20:
 .endp:
     pop es
     pop ds
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
     
 %endif

include/BIOS/func/ext_read.nasm

@@ -76,7 +76,7 @@ endstruc
 ;                         uint16_t count, uint8_t drive_num)
 ALIGN 4, db 0x90
 read_disk_raw:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:                        
     mov ax, LBAPkt_t_size
     push ax                 ; len
@@ -123,7 +123,7 @@ read_disk_raw:
     ERROR STAGE2_MBR_DISK_READ_ERROR
     %endif
 .endf:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 %endif

include/BIOS/func/video.nasm

@@ -20,7 +20,7 @@
 ALIGN 4, db 0x90
 SetTextMode:
 .prolog:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     pushf
 .func:
     xor ah, ah                  ; Set Video mode BIOS function
@@ -33,14 +33,14 @@ SetTextMode:
     int 0x10                    ; call video interrupt
 .endp:
     popf
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; disables blinking text mode cursor via crtc pokes
 ; 0x3D4/0x3D5 for color, mono at 0x3B4/0x3B5
 ALIGN 4, db 0x90
 disable_cursor_crtc:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     mov dx, 0x3D4
 	mov al, 0xA	    ; low cursor shape register
@@ -50,13 +50,13 @@ disable_cursor_crtc:
 	mov al, 0x20	; bits 6-7 unused, bit 5 disables the cursor, bits 0-4 control the cursor shape
 	out dx, al
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; disables blinking text mode cursor via BIOS int 10h, ah = 01
 ALIGN 4, db 0x90
 disable_cursor_bios:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     push bx
     mov  ah, 03h      ; read cursor pos & shape
@@ -68,14 +68,14 @@ disable_cursor_bios:
     int  10h
     pop  bx
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; Prints a C-Style string (null terminated) using BIOS vga teletype call
 ; void PrintString(char* buf)
 ALIGN 4, db 0x90
 PrintString:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     mov di, [bp + 4]    ; first arg is char[] 
 .str_len:
     xor cx, cx         ; ECX = 0
@@ -91,6 +91,9 @@ PrintString:
     mov si, [bp + 4]            ; source string
 .print_L0:
     movzx ax, byte [si]
+    %ifdef __STEVIA_DEV_DEBUG
+    out 0xe9, byte al           ; bochs magic debug port
+    %endif
     push ax
     call PrintCharacter
     add sp, 0x2
@@ -101,14 +104,14 @@ PrintString:
     jcxz PrintString.endp
     jmp PrintString.print_L0    ; Fetch next character from string
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret                         ; Return from procedure
 
 ; Prints a single character
 ; void PrintCharacter(char c);
 ALIGN 4, db 0x90
 PrintCharacter:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     mov al, byte [bp + 4]       ; AL = character c
     mov ah, 0x0E                ; INT 0x10, AH=0x0E call
@@ -116,7 +119,7 @@ PrintCharacter:
     int 0x10                    ; call video interrupt
                                 ; TODO: check for carry and clear carry before call
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; TODO: fix the prolog, epilog and stack usage to confirm with cdecl16
@@ -124,7 +127,7 @@ PrintCharacter:
 ; void PrintDWORD(uint32_t val);
 ALIGN 4, db 0x90
 PrintDWORD:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func: 
     mov si, IntToHex_table
     mov ebx, 16     ; base-16
@@ -166,7 +169,7 @@ PrintDWORD:
     jmp PrintDWORD.print_stack
 
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 %endif
 %define __INC_VIDEO

include/cdecl16.inc

@@ -13,8 +13,8 @@
 ;     You should have received a copy of the GNU General Public License
 ;     along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
-%ifnmacro __CDECL16_ENTRY
-%macro __CDECL16_ENTRY 0-1
+%ifnmacro __CDECL16_PROC_ENTRY
+%macro __CDECL16_PROC_ENTRY 0-1
     push bp
     mov bp, sp
 
@@ -28,8 +28,8 @@
 %endmacro
 %endif
 
-%ifnmacro __CDECL16_EXIT
-%macro __CDECL16_EXIT 0
+%ifnmacro __CDECL16_PROC_EXIT
+%macro __CDECL16_PROC_EXIT 0
     pop bx
     pop di
     pop si
@@ -39,35 +39,35 @@
 %endmacro
 %endif
 
-; __CDECL16_ARGS nargs
+; __CDECL16_PROC_ARGS nargs
 ;   Creates %$arg1 .. %$argN as [bp+4], [bp+6], ...
 ;   for use inside of function bodies
-;
-%ifnmacro __CDECL16_ARGS
-%macro __CDECL16_ARGS 1
+%ifnmacro __CDECL16_PROC_ARGS
+%macro __CDECL16_PROC_ARGS 1
+    %push __CDECL16_PROC_ARGS
     %assign %$__i 1
     %rep %1
         %xdefine %$arg%$__i  [bp + 4 + 2*(%$__i-1)]
         %assign  %$__i %$__i + 1
     %endrep
+    %pop
 %endmacro
 %endif
 
-; __CDECL16_PUSH a,b,c  ==> push c / push b / push a
+; __CDECL16_CALL_ARGS a,b,c  ==> push c / push b / push a
 ;   handles pushing values to the stack in the correct order
-%ifnmacro __CDECL16_PUSH
-%macro __CDECL16_PUSH 1-*
-    %assign %$__i %0
+%ifnmacro __CDECL16_CALL_ARGS
+%macro __CDECL16_CALL_ARGS 1-*
     %rep %0
-        push %[%$__i]
-        %assign %$__i %$__i - 1
+        %rotate -1      ; move the last argument into %1
+        push %1         ; push last, then next-to-last, ...
     %endrep
 %endmacro
 %endif
 
 ; __CDECL16_CALL func, nargs   ; adds sp by nargs*2 after call
 ;   adds up word pushes to restore stack frame
-;   WARNING: if you push a dword it will only count 2, use __CDECL16_CALL_SIZED
+;   WARNING: if you push a dword it will only count 2, use __CDECL16_CALL_ARGS_SIZED
 %ifnmacro __CDECL16_CALL
 %macro __CDECL16_CALL 2
     call %1
@@ -75,57 +75,52 @@
 %endmacro
 %endif
 
-; __CDECL16_CALL_SIZED func, size1[, size2 ...]  ; sizes in BYTES
+; __CDECL16_CALL_ARGS_SIZED func, size1[, size2 ...]  ; sizes in BYTES
 ;   if you *need* to pass dword sized args in 16-bit mode, use this to properly
 ;   count the stack frame to restore later!
-%ifnmacro __CDECL16_CALL_SIZED
-%macro __CDECL16_CALL_SIZED 2-*
+%ifnmacro __CDECL16_CALL_ARGS_SIZED
+%macro __CDECL16_CALL_ARGS_SIZED 2-*
+    %push __CDECL16_CALL_ARGS_SIZED
     call %1
     %assign %$__sum 0
     %assign %$__i 2
     %rep %0-1
-        %assign %$__sum %$__sum + %[%$__i]
+        %assign %$__sum %$__sum + %[%$__i]   ; sizes may be expressions
         %assign %$__i %$__i + 1
     %endrep
-    add sp, %$__sum
-%endmacro
-%endif
-
-; __CDECL16_INVOKE func, arg1[, arg2 ...]
-;   pushes args right-to-left, calls, then add sp by (#args)*2
-;   !!! warning for word sized args only !!!
-%ifnmacro __CDECL16_INVOKE
-%macro __CDECL16_INVOKE 1-*
-    %assign %$__argc %0-1
-    %if %$__argc > 0
-        ; push args right-to-left
-        %assign %$__i %0
-        %rep %$__argc
-            push %[%$__i]
-            %assign %$__i %$__i - 1
-        %endrep
-        call %1
-        add  sp, %$__argc*2
-    %else
-        call %1
+    %if %$__sum & 1
+        %error "__CDECL16_CALL_ARGS_SIZED: total size is odd; pushes must sum to whole bytes actually pushed (usually even)."
     %endif
+    add sp, %$__sum
+    %pop
 %endmacro
 %endif
 
-
-%ifnmacro __CDECL16_CALLER_SAVE
-%macro __CDECL16_CALLER_SAVE 0
-    push ax
-    push cx
-    push dx
+%ifnmacro __CDECL16_CLOB
+; Save registers in the order listed. Supports "flags" as a pseudo-reg.
+%macro __CDECL16_CLOB 1-*
+    %rep %0
+        %ifidni %1, flags
+            pushf
+        %else
+            push %1
+        %endif
+        %rotate 1
+    %endrep
 %endmacro
 %endif
 
-%ifnmacro __CDECL16_CALLER_RESTORE
-%macro __CDECL16_CALLER_RESTORE 0
-    pop dx
-    pop cx
-    pop ax
+%ifnmacro __CDECL16_UNCLOB
+; Restore in reverse order of CLOB. Supports "flags".
+%macro __CDECL16_UNCLOB 1-*
+    %rep %0
+        %rotate -1
+        %ifidni %1, flags
+            popf
+        %else
+            pop %1
+        %endif
+    %endrep
 %endmacro
 %endif
 

include/fat32/FAT32_SYS.inc

@@ -23,16 +23,11 @@
 ; returns: none
 ALIGN 4, db 0x90
 InitFATDriver:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
-    mov ax, FAT32_State_t_size
-    push ax                     ; length of fat32_state structure
-    xor ax, ax
-    push ax                     ; init fat32_state with zero
-    mov ax, fat32_state
-    push ax                     ; address of structure
-    call kmemset
-    add sp, 0x6
+
+    __CDECL16_CALL_ARGS fat32_state, 0x0000, FAT32_State_t_size
+    __CDECL16_CALL kmemset, 3
 
 .calc_active_part:
     mov ax, word [partition_offset]            
@@ -70,14 +65,14 @@ InitFATDriver:
     mov eax, dword [bx + FAT32_ebpb_t.root_clus_dword]
     mov dword [di + FAT32_State_t.curr_dir_cluster_32], eax
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 .error:
     ERROR STAGE2_FAT32_INIT_CF
 
 ALIGN 4, db 0x90
 FSInfoPrinter:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ;info we want to print to validate we are loading stuff from the disk correctly
     ; boot_drive # (i.e 0x80)
@@ -88,7 +83,7 @@ FSInfoPrinter:
     ; print entire FAT32 state
     ;
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 .error:
     ERROR STAGE2_ERROR_INFOPRINTER
@@ -104,18 +99,19 @@ FSInfoPrinter:
 ; uint32_t SearchFATDIR(uint8_t* SFN);
 ALIGN 4, db 0x90
 SearchFATDIR:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .file_lookup:
-    print_string SearchFATDIR_info
+    __CDECL16_CALL_ARGS SearchFATDIR_info
+    __CDECL16_CALL PrintString, 1
+
     mov bx, fat32_state
     .load_first_dir:
-        mov eax, dword [bx + FAT32_State_t.curr_dir_cluster_32]
-        push dword eax          ; cluster
-        mov ax, dir_buffer
-        push ax                 ; offset
-        xor ax, ax
-        push ax                 ; segment
-        call ReadFATCluster     ; uint8_t ReadFATCluster(uint16_t seg, uint16_t offset, uint32_t cluster)
+
+        ; uint8_t ReadFATCluster(uint16_t seg, uint16_t offset, uint32_t cluster)
+        push dword [bx + FAT32_State_t.curr_dir_cluster_32]          ; cluster
+        push dir_buffer                                              ; offset
+        push 0x0000                                                  ; segment
+        call ReadFATCluster
         add sp, 0x8
 
         mov si, dir_buffer
@@ -124,10 +120,10 @@ SearchFATDIR:
     .load_next_dir:
         ; if eax >= 0x0FFFFFF8 then there are no more clusters (end of chain)
         ; if eax == 0x0FFFFFF7 then this is a cluster that is marked as bad
-        
-        mov eax, dword [bx + FAT32_State_t.curr_dir_cluster_32]
-        push dword eax
-        call NextCluster        ; uint32_t NextCluster(uint32_t active_cluster);
+
+        ; uint32_t NextCluster(uint32_t active_cluster);
+        push dword [bx + FAT32_State_t.curr_dir_cluster_32]
+        call NextCluster        
         add sp, 0x4
 
         cmp eax, 0x0fff_fff7
@@ -137,16 +133,14 @@ SearchFATDIR:
 
     .load_next_dir_next_OK:
         ; load 512 bytes of directory entries from data sector
-        mov eax, [bx + FAT32_State_t.curr_dir_cluster_32]
-        push dword eax          ; cluster
 
-        mov ax, dir_buffer    
-        push ax                 ; offset
-
-        xor ax, ax
-        push ax                 ; segment
-        call ReadFATCluster     ; uint8_t ReadFATCluster(uint16_t seg, uint16_t offset, uint32_t cluster)
+        ; uint8_t ReadFATCluster(uint16_t seg, uint16_t offset, uint32_t cluster)
+        push dword [bx + FAT32_State_t.curr_dir_cluster_32] ; cluster   
+        push dir_buffer                                     ; offset
+        push 0x0000                                         ; segment
+        call ReadFATCluster     
         add sp, 0x8
+
     .empty_dir_entry:
         ; check for 0x0 in first byte, if true then there are no more files
         ; if true we did not find the file, we should error here
@@ -176,7 +170,9 @@ SearchFATDIR:
 
     ; TODO: move this to a seperate string search function
     .parse_dir:
-        print_string MaybeFound_Boot_info
+        __CDECL16_CALL_ARGS MaybeFound_Boot_info
+        __CDECL16_CALL PrintString, 1
+        
         .lfn_check:
             ; check for ATTR_READ_ONLY | ATTR_HIDDEN | ATTR_SYSTEM | ATTR_VOLUME_ID  (0x0F) in offset 11
             ; TODO: going to skip LFN for now, since all valid volumes will have SFN's
@@ -201,7 +197,7 @@ SearchFATDIR:
             mov ax, [si + FAT32_SFN_t.cluster_16_low]
             ; eax == first cluster of file
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; BUG: this function needs review
@@ -210,20 +206,15 @@ SearchFATDIR:
 ; if eax == 0x0FFFFFF7 then this is a cluster that is marked as bad
 ALIGN 4, db 0x90
 NextCluster:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
-    print_string NextFATCluster_info
+    __CDECL16_CALL_ARGS NextFATCluster_info
+    __CDECL16_CALL PrintString, 1
 
-    mov ax, FAT32_NextClusterData_t_size
-    push ax                     ; length
-    xor ax, ax
-    push ax                     ; init with zero
-    mov ax, fat32_nc_data
-    push ax                     ; address of structure
-    call kmemset
-    add sp, 0x6
+    __CDECL16_CALL_ARGS fat32_nc_data, 0x0000, FAT32_NextClusterData_t_size
+    __CDECL16_CALL kmemset, 3
 
-    mov edx, dword [bp + 4]
+    mov edx, dword [bp + 4]                      ; active_cluster
     mov si, fat32_nc_data                        ; instead of push/pop and moving the data back
     mov di, fat32_bpb                            ; load si & di then use xchg
     mov bx, fat32_state
@@ -270,12 +261,13 @@ NextCluster:
 ;                         uint32_t lba,
 ;                         uint16_t count, uint16_t drive_num)
 .read_cluster:
-; next_cluster = fat_buffer[entry_offset]
+    ; next_cluster = fat_buffer[entry_offset]
     mov ebx, dword [si + FAT32_NextClusterData_t.entry_offset]
     mov si, fat_buffer
     mov eax, dword [bx+si+0]
+    ; BUG: ???
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 .error_cfdivz:
     ERROR STAGE2_FAT32_NCLUS_CFDIVZ
@@ -283,9 +275,10 @@ NextCluster:
 ; uint8_t ReadFATCluster(uint16_t seg, uint16_t offset, uint32_t cluster)
 ALIGN 4, db 0x90
 ReadFATCluster:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
-    print_string ReadFATCluster_info
+    __CDECL16_CALL_ARGS ReadFATCluster_info
+    __CDECL16_CALL PrintString, 1
 
     mov bx, fat32_bpb
     mov si, fat32_ebpb
@@ -318,7 +311,7 @@ ReadFATCluster:
     call read_disk_raw  
     add sp, 0xC
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 .error:
     ERROR STAGE2_FAT32_CLS2LBA_CF

include/util/arena_alloc.nasm

@@ -12,7 +12,7 @@ endstruc
 ; void arena_init(ArenaState *a)
 ;
 arena_init:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     mov ax, word [bp + 4]     ; ptr to state structure
     mov di, ax
@@ -35,7 +35,7 @@ arena_init:
     add sp, 0x6
 
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; size_t align_up(size_t x, size_t a)
@@ -44,7 +44,7 @@ arena_init:
 ; (x + (a-1)) & ~(a-1)
 ; return value in ax
 arena_align_up:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ; if a == 0 return x
     mov ax, [bp + 4]      ; x
@@ -81,7 +81,7 @@ arena_align_up:
 
     mov ax, cx            ; move to ax and return
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; void* arena_alloc(size_t bytes, size_t align)
@@ -89,7 +89,7 @@ arena_align_up:
 ; bp-4 - aligned_ptr 
 ; bp-6 - new_end
 arena_alloc:
-    __CDECL16_ENTRY 0x10
+    __CDECL16_PROC_ENTRY 0x10
 .func:
     ; remove bytes from pool and increment mark to the new cursor location
     ; return a pointer to the begining of  allocated segment
@@ -133,36 +133,36 @@ arena_alloc:
     ; return aligned_ptr
     mov ax, word [bp - 4]
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 .error:
     ERROR STEVIA_DEBUG_ERR
 
 arena_mark:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ; return the current location of the 'cursor' in the allocator
     ERROR STEVIA_DEBUG_UNIMPLEMENTED
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 arena_reset_to:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ; rewind the arena to a previously marked point
     ERROR STEVIA_DEBUG_UNIMPLEMENTED
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 arena_reset:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     ; reset the entire heap to a fresh state
     ERROR STEVIA_DEBUG_UNIMPLEMENTED
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 %endif

include/util/kmem_func.nasm

@@ -19,7 +19,7 @@
 ; void* kmemset_byte(void* dst, uint8_t val, uint16_t len);
 ALIGN 4, db 0x90
 kmemset:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
  .func:
     mov     cx, [bp + 8]        ; uint16_t len
     mov     al, byte [bp + 6]   ; uint8_t val
@@ -29,14 +29,14 @@ kmemset:
     rep     stosb
     mov     ax, di         ; return pointer to dest + len (last elem of dest)
 .endp:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 ; uint8_t* kmemset(uint16_t* dest, uint16_t* src, uint16_t len);
 ; not overlap safe
 ALIGN 4, db 0x90
 kmemcpy:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .func:
     mov cx, [bp + 8]        ; len
     mov si, [bp + 6]        ; src
@@ -46,7 +46,7 @@ kmemcpy:
     rep movsb
     mov ax, di              ; return pointer to dest
 .endf:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 %endif

include/util/kmemcpy5_func.nasm

@@ -20,7 +20,7 @@
 ; not overlap safe, only for
 ALIGN 4, db 0x90
 kmemcpy5:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     push ds
     push es
 .setup_segments:
@@ -41,7 +41,7 @@ kmemcpy5:
     pop es
     pop ds
 .endf:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 %define __INC_KMEMCPY5_FUNC

include/util/kmemset4_func.nasm

@@ -19,7 +19,7 @@
 ; word kmemset_byte(word segment, word dst, byte val, word len);
 ALIGN 4, db 0x90
 kmemset4:
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
 .setup_segment:
     push es
     mov ax, [bp + 4]
@@ -35,7 +35,7 @@ kmemset4:
 .restore_segments:
     pop es
 .endf:
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 
 %endif

scripts/create-disk.sh

@@ -124,8 +124,11 @@ if [[ "$OSTYPE" == "linux-gnu"* ]]; then
         echo "[2/7] Write DOS partition table (single FAT32 LBA @ 2048)"
         "$SF" --no-reread "$disk_img" < /tmp/pt.sfdisk
 
-        echo "[3/7] Make FAT32 filesystem in partition image"
-        "$MKFS" -v -F32 -s 1 -n 'STEVIAFS' "$part_img"
+        # BUG: the default disk img is 256MiB which mkfs.fat wants to create
+        #      a FAT16 FS by default. it needs to be at least 2GiB to to 'lock out'
+        #      FAT16 as an option. Force FAT32 here, might(?) break some things.
+        echo "[3/7] Make FAT filesystem in partition image"
+        "$MKFS" -F32 -v -n 'STEVIAFS' "$part_img"
 
         echo "[4/7] Patch VBR inside partition image (preserve BPB)"
 

src/stage2/stage2.nasm

@@ -34,13 +34,6 @@
 %include "early_mem.inc"
 %include "error_codes.inc"
 
-%macro print_string 1
-    mov ax, %1
-    push ax
-    call PrintString
-    add sp, 0x2
-%endmacro
-
 section .text
 begin_text:
 ; dl = byte boot_drive
@@ -135,60 +128,54 @@ main:
     je main.stage2_main
     ERROR STAGE2_SIGNATURE_MISSING
 .stage2_main:
-    mov ax, PartTable_t_size
-    push ax                                                 ; len = PartTable_t_size
-    mov ax, word [vbr_part_table_ptr]                       ; src = ptr to vbr partition_table
-    push ax
-    mov ax, partition_table                                 ; dst
-    push ax
-    call kmemcpy                                            ; copy partition table data to .data section in stage2
-    add sp, 0x6
+    ; copy partition table data to .data section in stage2
+    __CDECL16_CALL_ARGS partition_table, word [vbr_part_table_ptr], PartTable_t_size
+    __CDECL16_CALL kmemcpy, 3
 
-    mov ax, (FAT32_bpb_t_size + FAT32_ebpb_t_size)          ; len
-    push ax
-    mov ax, word [vbr_fat32_bpb_ptr]                        ; src            
-    push ax
-    mov ax, fat32_bpb                                       ; dst
-    push ax
-    call kmemcpy                                            ; copy bpb & ebpb to memory
-    add sp, 0x6
+    ; copy bpb & ebpb to memory
+    __CDECL16_CALL_ARGS fat32_bpb, word [vbr_fat32_bpb_ptr], (FAT32_bpb_t_size + FAT32_ebpb_t_size) 
+    __CDECL16_CALL kmemcpy, 3
 
     call SetTextMode
     call disable_cursor_bios
-    print_string HelloPrompt_info
-    
-    ; setup the early heap
-    mov ax, early_heap_state    
-    push ax                             ; address in bss of state structure
-    call arena_init
-    add sp, 0x2
 
+    __CDECL16_CALL_ARGS HelloPrompt_info
+    __CDECL16_CALL PrintString, 1
+
+    ; setup the early heap
+    __CDECL16_CALL_ARGS early_heap_state
+    
     ; enable A20 gate
     call EnableA20
-    print_string A20_Enabled_OK_info
+    __CDECL16_CALL_ARGS A20_Enabled_OK_info
+    __CDECL16_CALL PrintString, 1
 
     ; get system memory map
     call GetMemoryMap
-    print_string MemoryMap_OK_info
+    __CDECL16_CALL_ARGS MemoryMap_OK_info
+    __CDECL16_CALL PrintString, 1
 
     ; enter unreal mode (enter PM w/ 16 bit code, 32 bit flat memory model & return to real)
     ; ds, es will be set to the 64KiB STAGE2_SEGMENT, fs/gs will be flat/huge memory (4GiB)
     ; use __REFLAT macros to re-flat ds/es for easy transfers to >1MiB
     ; NOTE: if you modify a segment register you will need to re-unreal it
     call EnterUnrealMode
-    print_string UnrealMode_OK_info
+    __CDECL16_CALL_ARGS UnrealMode_OK_info
+    __CDECL16_CALL PrintString, 1
 
     ; FAT Driver setup
     call InitFATDriver
-    print_string InitFATSYS_OK_info
+    __CDECL16_CALL_ARGS InitFATSYS_OK_info
+    __CDECL16_CALL PrintString, 1
 
     ;
     ; Find first cluster of bootable file
     call SearchFATDIR
     push dword eax      ; save first cluster of bootable file
 
-    print_string FileFound_OK_info
-    
+    __CDECL16_CALL_ARGS FileFound_OK_info
+    __CDECL16_CALL PrintString, 1
+
     pop dword eax
     push dword eax      ; print Cluster of boot file
     call PrintDWORD     ; void PrintDWORD(uint32_t dword)
@@ -263,8 +250,7 @@ hcf:
 
 ALIGN 4, db 0x90
 EnterUnrealMode:
-    __BOCHS_MAGIC_DEBUG
-    __CDECL16_ENTRY
+    __CDECL16_PROC_ENTRY
     cli                                   ; no interrupts
 .func:    
     lgdt [((__STAGE2_SEGMENT << 4) + unreal_gdt_info)]                 ; load unreal gdt
@@ -275,9 +261,6 @@ EnterUnrealMode:
 
     ; set cs to a pm code segment (0x8) w/ the following
     jmp 0x0008:EnterUnrealMode.set_segs
-    ;db 0xEA                               ; jmp far imm16:imm16
-    ;dw EnterUnrealMode.set_segs           ; error_far_ptr
-    ;dw 0x0008                             ; error_far_seg
 .set_segs:
     mov ax, 0x10                          ; select descriptor 2
     mov ds, ax                            ; 10h = 0001_0000b
@@ -292,7 +275,7 @@ EnterUnrealMode:
     mov eax, cr0
     and eax, ~1                           ; toggle bit 1 of cr0
     mov cr0, eax                          ; back to realmode
-    jmp 0x0000:EnterUnrealMode.endp
+    jmp __STAGE2_SEGMENT:EnterUnrealMode.endp
 .endp:
     sti                                   ; re-enable interupts
 
@@ -301,7 +284,7 @@ EnterUnrealMode:
     ; to easily access data outside of 64KiB boundries using ds/es addressing
     __TINY_DS_ES
 
-    __CDECL16_EXIT
+    __CDECL16_PROC_EXIT
     ret
 end_text: